- 2-component adhesive based on polyurethane
- Fast curing even in thick layers
- Non-shrink curing
- Excellent adhesion on metals
- Extremely high tensile strength (ift-Test certificate)
- Weathering resistant bonding of corner connections on metal windows, doors and façades conservatories
- General bonding in metal construction
- Also suitable for frictional bonding of very different materials such as wood, metal, plastics, stone, etc.
|FEATURE||TECHNICAL VALUE||INSPECTION CONDITIONS|
|Processing time (100 g)||~ 45 minutes||23°C, 50% RAH|
|Po life (100 g)||~ 60 minutes||23°C, 50% RAH|
|Mixin ratio, volume (A:B)||1:1|
|Processing temperature||+5°C up to +35°C|
|Viscosity (23 °C)||Stable, thixoptropic|
|Density at 23°C||Approx. 1,52 g/cm³|
|Temperature resistance||-30°C up to +80°C (+100 °C)|
|Functional stability||~6 hours||23°C, 50% RAH|
|Tensile strength (24 hours)||~14.000 N||23°C, 50% RAH|
|Shelf life||12 months||23°C, 50% RAH|
|Packaging||2×310 ml twin cartridge / 10 pc/box|
This table is for guidance only and does not constitute a binding statement. In practice self-tests are to be carried out in advance. Further information can be obtained via our application technology.
All adherent surfaces must be clean, dry, free from fat and sustainable. Any contaminant such as release agents, preserving agents, grease, oil, dust, water, old adhesives or sealants and other substances which could affect adhesion, has to be removed.
Cleaning of non-porous substrates: Apply cleaner by using a clean, lint-free cotton cloth.
Cleaning porous substrates: Clean surfaces with steel-wire brush e.g. to remove loose particles.
Apply adhesive and assemble parts immediately, if possible, at the latest however within the processing time. Because of the variety of possible influences while processing and application customer tests are required. Please observe the recommended shelf life which is printed on the packaging.
Before applying the adhesive the user has to ensure that the materials in the area of contact (solid, liquid and gaseous) are compatible with the adhesive and do not damage or alter (e. g. discolour) them. As for the materials that will be used at a later stage in the surrounding area of the adhesive the user has to clarify beforehand that the substances of content or evaporations do not lead to an impairment or alteration (e. g. discolouration) of the adhesive. In case of doubt the user should consult the respective manufacturer of the material.
For adhesion in external areas with impact of humidity and/or uv-radiation in external areas we recommend the use of hybrid-adhesives. This excludes weathering-stressed adhesion of wood and wood derived timber products with subsequent protective coating according to DIN EN 204 D 4. Paints, lacquers, plastics and any other coatings must be compatible to the adhesive.
- Special application guns for twin-cartridges are available.
- Clean the tools, e.g. spatula, with cleaner before the adhesive has cured.
- The cured adhesive can only be removed mechanically.
- In case of UV-radiation stress discolourations may occur.
- Not suitable for the bonding of glass, polyethylene (PE), polypropylene (PP), polyamide (PA),
polyfluoroethylene (PTFE), bituminous, waxy or oily substrates or similar.
We recommend to store products in unopened original packaging dry (< 60 % RAH) at temperatures of +15°C up to +25°C. If products are stored and/or transported at higher temperatures/humidity for longer periods (some weeks), shelf life may be reduced or a change of material characteristics may occur.
Only for commercial users. Please observe material safety data sheet. For information about disposal please refer to material safety data sheet.
All information in this publication is based on our current technical knowledge and experiences. However, since conditions and methods of use and application of our products are beyond our control, we suggest you to test the product before final use. Information given in this technical data sheet is not to be seen as a warranty. Characteristics stated in this data sheet define characteristics of the article broadly and concluding. Suggestions of use are not to be taken as confirmation of the appropriateness for the recommended intended use. We reserve the right to improve the product adjusting it according to technical progress and new developments. We are at your disposal both for inquiries as well as specific application problems. If a governmental approval or clearance is necessary for the application of our products, the user is responsible for the obtainment of such. Our recommendations do not excuse the user from the obligation to take into consideration the possibility of infringement of third parties‘ rights.